Factory Direct Sale Non Return Best Selling DN 100 Cast Iron Y-Strainer

Y-Strainer Application Information

Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

Y-Strainers are used in a wide variety of liquid straining applications to protect downstream process system components in many industries, including: chemical processing, petroleum, power generation and marine. Water handling applications, where Y-Strainers are used to protect equipment that could be damaged or clogged by unwanted sand, gravel or other debris, are very common

Product parameters

Application

Feature of Y-Strainer

• Investment Cast Body Construction​

• Perforated Screen in 1mm hole for 1" ~ 3" ; 3mm hole for 4" ~ 12"

• Mesh Screen is available upon request

• Mesh Screen size from 20 mesh to 400 mesh

Structure and working principle

Bag filter is a kind of pressure type filter, filter cylinder, cylinder lid, and main quick opening mechanism, stainless steel filter bag to strengthen network main parts, such as the filtrate by filter shell side inlet tube into the filter bag, filter bag itself is a device in strengthening a basket with netting on top, liquid penetrant fineness required for grades of filter bag that can obtain qualified filtrate impurity particles blocked by the filter bag.
The machine is very convenient to change the filter bag, filtering basically no material consumption.
Bag filter has many advantages such as reasonable structure, good sealing, strong circulation ability and easy operation.
In particular, the side leakage rate of the filter bag is small, which can correctly guarantee the filtration accuracy, and quickly change the filter bag, so that the operation cost is reduced.

The installation

During installation, please follow the following steps: 1. Place the bag filter on the station to be filtered, and fix it after connecting the inlet and outlet flange or pipe teeth;
2. Put the metal inner net gently into the bag filter, so that the collar of the inner net is consistent with the mouth of the bag filter. 3. Place the filter bag, so that the ring of the filter bag is consistent with the collar of the metal inner net
Ο type sealing ring in the Ο type of the tank, Ο type sealing ring cannot be distorted or deformation, buckle more bag filter filter bag 5 holding pressure ring cover handle, grabbing at the other end of the cover (more than the top of the bag filter rotation handwheel) after 6 cover alignment, and tighten the two diagonal lifting cap, will tighten all the lifting cap (twisted) with short stick inserted rings within 7
Close the exhaust valve (8) installed on the top of the bag filter. Please check whether the connecting pipes are firm.
9 Open the output valve and open the heat source entry valve to make the temperature of the filter rise to the specified temperature. 10 Open the input valve slowly and let the liquid flow into the filter slowly and fill the filter to prevent the liquid from suddenly impacting the filter bag and causing rupture. Then observe whether there is any leakage

Factory introduction

Packaging logistics

FAQ

Q1. How can we get the quotation of flter cartridges
A: Kindly please let us know the specifications, such as the material, length, micron, adapter, apply in which industry.
Q2. How about your delivery time?
A: Generally, it will take 20 to 25 days after receiving your advance payment. The specific delivery time depends on the items and
the quantity of your order. and if the item was non standard, we have to consider extra 10-15days for tooling / mould made.
Q3. Can you produce according to the samples or drawings?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q4. How about tooling Charge?
A: Tooling charge only charge once when first order, all future orders would not charge again even tooling repair or under maintance.
Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.