Water Strainer Cast Stainless Steel WCB Flange Connection
Y-Strainer Application Information
Y-Strainers are devices for mechanically removing unwanted solids
from liquid, gas or steam lines by means of a perforated or wire
mesh straining element. They are used in pipelines to protect
pumps, meters, control valves, steam traps, regulators and other
Y-Strainers are very cost effective straining solutions in many
applications. Where the amount of material to be removed from the
flow is relatively small, resulting in long intervals between
screen cleanings, the strainer screen is manually cleaned by
shutting down the line and removing the strainer cap. For
applications with heavier dirt loading, Y-Strainers can be fitted
with a "blow-off" connection that permits the screen to be cleaned
without removing it from the strainer body.
Y-Strainers are used in a wide variety of liquid straining
applications to protect downstream process system components in
many industries, including: chemical processing, petroleum, power
generation and marine. Water handling applications, where
Y-Strainers are used to protect equipment that could be damaged or
clogged by unwanted sand, gravel or other debris, are very common
Structure and working principle
Bag filter is a kind of pressure type filter, filter cylinder,
cylinder lid, and main quick opening mechanism, stainless steel
filter bag to strengthen network main parts, such as the filtrate
by filter shell side inlet tube into the filter bag, filter bag
itself is a device in strengthening a basket with netting on top,
liquid penetrant fineness required for grades of filter bag that
can obtain qualified filtrate impurity particles blocked by the
The machine is very convenient to change the filter bag, filtering
basically no material consumption.
Bag filter has many advantages such as reasonable structure, good
sealing, strong circulation ability and easy operation.
In particular, the side leakage rate of the filter bag is small,
which can correctly guarantee the filtration accuracy, and quickly
change the filter bag, so that the operation cost is reduced.
During installation, please follow the following steps: 1. Place
the bag filter on the station to be filtered, and fix it after
connecting the inlet and outlet flange or pipe teeth;
2. Put the metal inner net gently into the bag filter, so that the
collar of the inner net is consistent with the mouth of the bag
filter. 3. Place the filter bag, so that the ring of the filter bag
is consistent with the collar of the metal inner net
Ο type sealing ring in the Ο type of the tank, Ο type sealing ring
cannot be distorted or deformation, buckle more bag filter filter
bag 5 holding pressure ring cover handle, grabbing at the other end
of the cover (more than the top of the bag filter rotation
handwheel) after 6 cover alignment, and tighten the two diagonal
lifting cap, will tighten all the lifting cap (twisted) with short
stick inserted rings within 7
Close the exhaust valve (8) installed on the top of the bag filter.
Please check whether the connecting pipes are firm.
9 Open the output valve and open the heat source entry valve to
make the temperature of the filter rise to the specified
temperature. 10 Open the input valve slowly and let the liquid flow
into the filter slowly and fill the filter to prevent the liquid
from suddenly impacting the filter bag and causing rupture. Then
observe whether there is any leakage
Q1. How can we get the quotation of flter cartridges
A: Kindly please let us know the specifications, such as the
material, length, micron, adapter, apply in which industry.
Q2. How about your delivery time?
A: Generally, it will take 20 to 25 days after receiving your
advance payment. The specific delivery time depends on the items
the quantity of your order. and if the item was non standard, we
have to consider extra 10-15days for tooling / mould made.
Q3. Can you produce according to the samples or drawings?
A: Yes, we can produce by your samples or technical drawings. We
can build the molds and fixtures.
Q4. How about tooling Charge?
A: Tooling charge only charge once when first order, all future
orders would not charge again even tooling repair or under
Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but
the customers have to pay the sample cost and the courier cost.